論文 - 岡安 和人
件数 42 件-
Fukutomi Hiroshi, Okayasu Kazuto, Onuki Yusuke, Hasegawa Makoto, Kobayashi Equo, Strnadel Bohumir, … 全著者表示
Fukutomi Hiroshi, Okayasu Kazuto, Onuki Yusuke, Hasegawa Makoto, Kobayashi Equo, Strnadel Bohumir, Umezawa Osamu 閉じる
MATERIALS TRANSACTIONS 63 ( 2 ) 148 - 156 2022年2月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 出版者・発行元:公益社団法人 日本金属学会 共著
<p>The relationship between the mechanism of high temperature deformation and the evolution behavior of microstructure and the texture during deformation, which has been found in various solid solution alloys, is clarified. It is shown that the preferential dynamic grain growth (PDGG) mechanism proposed by the authors can explain the behavior of microstructure change as well as texture change of all studied alloys without contradiction. The essential aspect of the PDGG mechanism is the preferential growth of crystal grains with the orientation stable for deformation and with low Taylor factor in the given deformation mode. It is concluded that the Taylor factor corresponds to dislocation density and stored energy during the high temperature deformation of solid solution alloys when viscous glide of dislocations is the rate controlling process. The possibility of the occurrence of the PDGG mechanism in materials other than solid solution alloys is also discussed.</p>
-
優先動的結晶粒成長機構によるFe-Mn-Si-Cr合金の集合組織制御と形状記憶特性の向上
福富 洋志, 鈴木 茂, 中島 格, 岡安 和人, 長谷川 誠, 小貫 祐介
鉄と鋼 107 ( 4 ) 312 - 320 2021年4月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:一般社団法人 日本鉄鋼協会 共著
<p>The development of cube texture in Fe-Mn-Si-Cr shape memory alloy by the preferential dynamic grain growth mechanism is experimentally examined. The plane strain compression deformation at 1173 K with strain rates of 2.0 × 10<sup>−3</sup> s<sup>−1</sup>, 1.0 × 10<sup>−3</sup> s<sup>−1</sup>, and 5.0 × 10<sup>−4</sup> s<sup>−1</sup> results in the development of cube texture. The maximum volume fraction of cube orientated grains is about 25% which is ten times as high as that before the deformation. It is experimentally confirmed that the specimen with {001}(surface of the tensile specimens) <110>(tensile direction) shows higher shape memory efficiency than those prepared by the so called training treatment. The texture evaluation by neutron diffraction method elucidates that control of the texture in the γ single phase state is effective to specify the active shear system contributing to the shape memory effect.</p>
-
種々の初期集合組織を有するAZ31BおよびAZ80マグネシウム合金の高温平面ひずみ圧縮変形下での組織と集合組織の形成機構
福富 洋志, 朴 亨均, 金 卷煦, 岡安 和人, 長谷川 誠, 梅澤 修
日本金属学会誌 83 ( 8 ) 264 - 272 2019年8月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:公益社団法人 日本金属学会 共著
<p>The effects of pre-existent textures on the evolution behaviors of microstructure and texture at high-temperature plane strain compression deformation of AZ31B magnesium alloy have been studied. Deformation is conducted at 723 K with a strain rate of 5.0 × 10<sup>−2</sup> s<sup>−1</sup>, up to −1.3 in true strain. When non-basal slip systems are the primary slip systems, {11<span style="text-decoration: overline;">2</span>0}<10<span style="text-decoration: overline;">1</span>0> texture develops. In this case, repeated change in microstructure and texture which was found in the previous work appeared with increasing strain. Namely, replacement of {11<span style="text-decoration: overline;">2</span>0}<10<span style="text-decoration: overline;">1</span>0> texture with {10<span style="text-decoration: overline;">1</span>0}<11<span style="text-decoration: overline;">2</span>0> texture and the reverse phenomenon occurs. While the {11<span style="text-decoration: overline;">2</span>0}<10<span style="text-decoration: overline;">1</span>0> oriented grains are small and with wavy shaped grain boundaries, the {10<span style="text-decoration: overline;">1</span>0}<11<span style="text-decoration: overline;">2</span>0> oriented grains are large and with rather straight grain boundaries. The mechanism of repeated change in microstructure and texture is discussed on the basis of preferential dynamic grain growth mechanism proposed by the authors.</p>
-
Kwon Hoo Kim, Kazuto Okayasu, Hiroshi Fukutomi
Materials Science Forum 879 938 - 942 2017年 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 出版者・発行元:Scientific.Net 共著
-
高温平面ひずみ圧縮変形下でAZ31マグネシウム合金に生ずる特異な結晶粒組織と集合組織の繰り返し変化
朴亨均、金卷煦、岡安和人、長谷川誠、福富 洋志
日本金属学会誌 80 ( 10 ) 612 - 619 2016年10月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:日本金属学会 共著
その他リンク: https://www.jstage.jst.go.jp/article/jinstmet/80/10/80_J2016011/_article/-char/en
-
Kwon-Hoo Kim, Kazuto Okayasu and Hiroshi Fukutomi
IOP Conf. Series: Materials Science and Engineering 82 012049 2015年4月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 出版者・発行元:IOP Publishing 共著
-
Kwon-Hoo Kim, Kazuto Okayasu and Hiroshi Fukutomi
Materials Transactions 56 ( 1 ) 17 - 22 2015年1月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 出版者・発行元:The Japan Institute of Metals Materials 共著
-
Control of Textures in Aluminum Solid Solution Alloys by Hightemperature Deformation
Hiroshi Fukutomi and Kazuto Okayasu
PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing 965 - 972 2013年8月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 出版者・発行元:John Wiley & Sons, Inc., Hoboken, NJ, USA 共著
その他リンク: https://onlinelibrary.wiley.com/doi/10.1002/9781118792148.ch118
-
AZ80マグネシウム合金の高温変形集合組織の形成に及ぼす初期集合組織の影響
金卷煦(珍旭)、岡安和人、福富洋志
軽金属 63 ( 6 ) 212 - 217 2013年6月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:一般社団法人 軽金属学会 共著
その他リンク: https://www.jstage.jst.go.jp/article/jilm/63/6/63_212/_article/-char/ja/
-
Fe-3mass%Si合金の高温単軸圧縮変形中に生じる優先動的結晶粒成長による集合組織形成に及ぼすP添加の影響
小貫 祐介・森 敬祐・岡安 和人・福富 洋志
鉄と鋼 99 ( 3 ) 228 - 235 2013年3月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:(一社)日本鉄鋼協会 共著
その他リンク: https://www.jstage.jst.go.jp/article/tetsutohagane/99/3/99_228/_article/-char/en
-
Texture Formation in AZ91 Magnesium Alloy during High-Temperature Uniaxial Compression
Jinuk KIM, Kazuto OKAYASU and Hiroshi FUKUTOMI
Materials Science Forum 753 493 - 496 2013年3月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 出版者・発行元:Trans Tech Publications Ltd 共著
-
Texture Formation in AA5182 Aluminum Alloy by Hot Extrusion
Kazuto OKAYASU and Hiroshi FUKUTOMI
Materials Science Forum 753 497 - 500 2013年3月
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 出版者・発行元:Trans Tech Publications Ltd 共著
-
Jinuk KIM, Kazuto OKAYASU and Hiroshi FUKUTOMI
Materials Transactions 54 ( 2 ) 192 - 198 2013年2月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 出版者・発行元:The Japan Institute of Metals Materials 共著
-
Yusuke Onuki, Ryosuke Hongo, Kazuto Okayasu, Hiroshi Fukutomi
Acta Materialia 61 1294 - 1302 2013年1月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 出版者・発行元:Acta Materialia, Inc. 共著
その他リンク: https://www.sciencedirect.com/science/article/pii/S1359645412008014
-
Jinuk Kim, Kazuto Okayasu and Hiroshi Fukutomi
Materials Transactions 53 ( 11 ) 1870 - 1875 2012年11月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 出版者・発行元:The Japan Institute of Metals 共著
その他リンク: https://www.jstage.jst.go.jp/article/matertrans/53/11/53_L-M2012828/_article
-
集合組織から見たCu-Al合金における高温変形下での組織形成過程
木下昌彦、長谷川誠、岡安和人、福富洋志
銅と銅合金 51 ( 1 ) 296 - 301 2012年8月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:日本伸銅協会 共著
-
Fe-3mass%Si合金の高温単軸圧縮変形による集合組織形成に及ぼす変形条件の影響
小貫祐介、岡安和人、福富洋志
鉄と鋼 98 ( 5 ) 177 - 183 2012年4月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:一般社団法人 日本鉄鋼協会 共著
その他リンク: https://www.jstage.jst.go.jp/article/tetsutohagane/98/5/98_5_177/_article/-char/ja/
-
Texture Formation by the Compression Deformation of AA5182 Aluminum Alloy at High Temperatures
Hyeon Mook Jeong, Kazuto Okayasu, Hiroshi Fukutomi
Materials Science Forum 715-716 918 - 923 2012年4月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Formation of Texture in AZ80 during High Temperature Compression Deformation
Jinuk Kim, Kazuto Okayasu, Hiroshi Fukutomi
Materials Science Forum 715-716 936 - 939 2012年4月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
高温平面ひずみ圧縮変形によりAZ80マグネシウム合金に形成される集合組織
金珍旭、岡安和人、福富洋志
軽金属 62 ( 2 ) 54 - 59 2012年2月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:一般社団法人 軽金属学会 共著
その他リンク: https://www.jstage.jst.go.jp/article/jilm/62/2/62_2_54/_article/
-
AZ80マグネシウム合金の高温単軸圧縮変形下での組織と集合組織の形成挙動
金珍旭、岡安和人、福富洋志
熱処理 52 ( 1 ) 4 - 10 2012年2月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:日本熱処理技術協会 共著
-
Texture Development in Ferritic Steels during High Temperature Uniaxial Compression Deformation
Yusuke Onuki, Kazuto Okayasu and Hiroshi Fukutomi
Materials Science Forum 702-703 810 - 813 2012年1月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Kazuto Okayasu, Shinsuke Takahata and Hiroshi Fukutomi
Materials Science Forum 702-703 336 - 339 2012年1月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Jinuk Kim, Kazuto Okayasu and Hiroshi Fukutomi
Materials Science Forum 702-703 340 - 343 2012年1月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Yusuke Onuki, Kazuto Okayasu and Hiroshi Fukutomi
ISIJ International 51 ( 9 ) 1564 - 1565 2011年9月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 共著
その他リンク: https://www.jstage.jst.go.jp/article/isijinternational/51/9/51_9_1564/_article
-
5182アルミニウム合金の高温単軸圧縮変形における{001}集合組織マップ(Mater. Trans. 51(2010) 2162–2167の翻訳論文)
鄭 鉉默、岡安和人、福富 洋志
軽金属 61 ( 2 ) 72 - 77 2011年2月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:一般社団法人 軽金属学会 共著
その他リンク: https://www.jstage.jst.go.jp/article/jilm/61/2/61_2_72/_article/-char/ja/
-
{001} Texture Map of AA5182 Aluminum Alloy for High Temperature Uniaxial Compression
Hyeon-Mook Jeong, Kazuto Okayasu, Hiroshi Fukutomi
Materials Transactions 51 ( 12 ) 2162 - 2167 2010年12月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 共著
その他リンク: https://www.jstage.jst.go.jp/article/matertrans/51/12/51_L-M2010820/_article
-
Texture Formation in Aluminum Solid Solution Alloys by High-temperature Deformation
Hiroshi Fukutomi, Kazuto Okayasu
Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan 101 - 106 2010年9月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
その他リンク: http://www.icaa-conference.net/ICAA12/proceedings/index.html
-
Hyeon-Mook Jeong, Kazuto Okayasu, Hiroshi Fukutomi
Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan 125 - 130 2010年9月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
その他リンク: http://www.icaa-conference.net/ICAA12/proceedings/index.html
-
H. Fukutomi, Y. Konno, K. Okayasu, M. Hasegawa, H. Nakatsugawa
Materials Science and Engineering A 527 ( 1-2 ) 61 - 64 2009年12月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 共著
その他リンク: https://www.sciencedirect.com/science/article/pii/S0921509309009095?via%3Dihub
-
Al-Mg固溶体合金の高温単軸圧縮変形における集合組織形成におよぼす溶質雰囲気の効果
岡安和人、竹腰弘毅、榊原将之、福富洋志
日本金属学会誌 73 ( 1 ) 58 - 63 2009年1月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:日本金属学会 共著
その他リンク: https://www.jstage.jst.go.jp/article/jinstmet/73/1/73_1_58/_article/-char/ja/
-
Effect of Mg Concentration on Texture Formation in Al-Mg Alloys during High Temperature Compression
Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara, Hiroshi Fukutomi
APPLICATIONS OF TEXTURE ANALYSIS: Ceramic Transactions 201 507 - 513 2008年11月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Effect of Deformation Constraints on the Texture Formation in Al-5mass%Mg Solid Solution at High Temperatures
Kazuto Okayasu, Masayuki Sakakibara and Hiroshi Fukutomi
MATERIALS PROCESSING AND TEXTURE: Ceramic Transactions 200 679 - 685 2008年10月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Kazuto Okayasu, Hiroki Takekoshi and Hiroshi Fukutomi
Materials Transactions 48 ( 8 ) 2002 - 2007 2007年8月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 出版者・発行元:日本金属学会 共著
その他リンク: https://www.jstage.jst.go.jp/article/matertrans/48/8/48_L-MRA2007869/_article
-
Kazuto Okayasu, Hiroki Takekoshi, Hiroshi Fukutomi
Materials Science Forum 558-559 551 - 556 2007年 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
その他リンク: https://www.webofscience.com/wos/woscc/full-record/WOS:000250408000086
-
Behaviors of High Temperature Deformation and Texture Development of AZ31 and AZ61 under Uniaxial Compression
L. Helis, K. Okayasu, H. Fukutomi
Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications 581 - 587 2006年11月 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Libor Helis, Kazuto Okayasu, Hiroshi Fukutomi
Materials Science and Engineering: A 430 98–103 2006年8月 [査読有り]
記述言語:英語 掲載種別:研究論文(学術雑誌) 共著
その他リンク: https://www.sciencedirect.com/science/article/pii/S0921509306005454?via%3Dihub
-
Al-3mass%Mg合金の高温圧縮変形下における集合組織形成
岡安 和人 福富 洋志
日本金属学会誌 70 ( 7 ) 562 - 567 2006年7月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 共著
その他リンク: https://www.jstage.jst.go.jp/article/jinstmet/70/7/70_7_562/_article/-char/en
-
高配向性ラメラ組織を有するTi-43mol%Al金属間化合物の創製とクリープ特性
福富洋志 朴奎侠 山口泰弘 岡安和人
軽金属 55 ( 8 ) 343 - 349 2005年8月 [査読有り]
記述言語:日本語 掲載種別:研究論文(学術雑誌) 出版者・発行元:一般社団法人 軽金属学会 共著
その他リンク: https://www.jstage.jst.go.jp/article/jilm/55/8/55_8_343/_article/-char/ja/
-
Texture Formation during high Temperature Deformation of Al-3mass%Mg Solid Solution
Kazuto Okayasu and Hiroshi Fukutomi
Materials Science Forum 495-497 579 - 584 2005年 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Deformation and Texture Behaviors of Al-3mass%Mg Alloy at High Temperatures
Kazuto Okayasu and Hiroshi Fukutomi
Proceedings of the International Body Engineering Conference 2003 465 - 470 2003年 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著
-
Orientation Distribution in Dynamically Recrystallized Nickel
H. Fukutomi, M. Hasegawa and K. Okayasu
Materials Science Forum 408-412 889 - 894 2002年 [査読有り]
記述言語:英語 掲載種別:研究論文(国際会議プロシーディングス) 共著