THIRATHIPVIWAT Pramote (ティラティープウィワット プラモート)

THIRATHIPVIWAT Pramote

所属組織

大学院工学研究院 システムの創生部門

職名

助教

生年

1984年

研究キーワード

High entropy alloys、Quantum beam science、mechanical properties、Alloy microstructure control

メールアドレス

メールアドレス



直近の代表的な業績 (過去5年) 【 表示 / 非表示

  • 【論文】 A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system   2022年03月

    【論文】 Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system  2021年08月

    【論文】 Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi high entropy alloy  2022年01月

    【論文】 Compositional complexity dependence of dislocation density and mechanical properties in high entropy alloy systems  2020年08月

    【論文】 A comparison study of dislocation density, recrystallization and grain growth among nickel, FeNiCo ternary alloy and FeNiCoCrMn high entropy alloy  2019年06月

学歴 【 表示 / 非表示

  • 2014年9月
    -
    2019年6月

    Technische Universität Dresden   博士課程   修了

  • 2006年10月
    -
    2008年11月

    Chulalongkorn University   修士課程(博士前期課程)   修了

学位 【 表示 / 非表示

  • 博士(工学) - ドレスデン工科大学(ドイツ)

学内所属歴 【 表示 / 非表示

  • 2022年4月
    -
    現在

    専任   横浜国立大学   大学院工学研究院   システムの創生部門   助教  

  • 2022年4月
    -
    現在

    併任   横浜国立大学   理工学部   機械・材料・海洋系学科   助教  

  • 2022年4月
    -
    現在

    併任   横浜国立大学   大学院理工学府   機械・材料・海洋系工学専攻   助教  

学外略歴 【 表示 / 非表示

  • 2020年11月
    -
    2022年3月

      Ibaraki university   Frontier research center for applied atomic sciences   研究員

  • 2015年1月
    -
    2020年1月

      Leibniz Institute for Solid State and Materials Research (IFW-Dresden)   Institute for Complex Materials   研究員

  • 2009年4月
    -
    2011年7月

      Showadenko K.K.   Aluminium Technology Center   研究員

研究分野 【 表示 / 非表示

  • ものづくり技術(機械・電気電子・化学工学) / 計測工学  / Materials characterization

  • ものづくり技術(機械・電気電子・化学工学) / 材料力学、機械材料  / Mechanical properties of metallic alloys

 

学位論文 【 表示 / 非表示

  • Microstructure, lattice strain and mechanical properties of single phase multi-component alloys

    THIRATHIPVIWAT Pramote

    2019年6月

    学位論文(博士)   単著    [査読有り]

     詳細を見る

  • Solidified and homogenized microstructures of super high strength Al-Zn-Mg-Cu alloys cast by low frequency electromagnetically chill method

    THIRATHIPVIWAT Pramote

    2008年11月

    学位論文(修士)   単著    [査読有り]

論文 【 表示 / 非表示

  • A role of atomic size misfit in lattice distortion and solid solution strengthening of TiNbHfTaZr high entropy alloy system

    Pramote Thirathipviwat, Shigeo Sato, Gian Song, Jozef Bednarcik, Kornelius Nielsch, Juree Jung, Jun … 全著者表示

    Scripta Materialia   210 ( 3 )   114470   2022年3月  [査読有り]

    DOI

     詳細を見る

    担当区分:筆頭著者, 責任著者   記述言語:英語   掲載種別:研究論文(学術雑誌)   出版者・発行元:Elsevier   共著  

  • Effect of fine dispersoids on dislocation density and dislocation rearrangement of Al-Mn alloy during tensile deformation

    Thirathipviwat, P; Kotake, T; Suzuki, T; Hasegawa, M; Matsumoto, K; Sato, S

    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING   927   2025年2月

    DOI Web of Science

     詳細を見る

    記述言語:日本語   掲載種別:研究論文(学術雑誌)   共著  

  • Lamellar orientation control of TiAl-based alloy by uniaxial compressive deformation at high-temperature in (α plus β) two-phase region

    Harada, S; Yamaguchi, T; Thirathipviwat, P; Hasegawa, M

    JOURNAL OF ALLOYS AND COMPOUNDS   1003   175717   2024年10月  [査読有り]

    DOI Web of Science

     詳細を見る

    記述言語:英語   掲載種別:研究論文(学術雑誌)   共著  

  • In situ neutron diffraction study and electron microscopy analysis of microstructure and texture evolution during annealing of rolled CoCrFeNi alloy doped with 1 at.% C

    Pramote Thirathipviwat, Makoto Hasegawa, Yusuke Onuki, Shigeo Sato, Oleg V Mishin

    Materials Characterization   212   113980   2024年6月  [査読有り]

    DOI

     詳細を見る

    担当区分:筆頭著者, 責任著者   記述言語:英語   掲載種別:研究論文(学術雑誌)   単著  

  • A correlation between texture evolution and dislocation density in Al-Mg alloys during uniaxial tensile deformation

    Thirathipviwat Pramote, Nozawa Sega, Furusawa Moe, Onuki Yusuke, Hasegawa Makoto, Matsumoto Katsush … 全著者表示

    Materials Letters   349   2023年6月

    CiNii Research

     詳細を見る

    記述言語:英語   掲載種別:研究論文(学術雑誌)   出版者・発行元:Elsevier   共著  

    In this study, the studies of texture evolution and dislocation density in Al-Mg alloys during uniaxial tensile deformation was performed by the neutron diffraction experiment. During tensile deformation under low strain rate (1.33 x 10-5 s-1), the (001) and (111) duplex texture was observed in Al-Mg alloys. The differences of pole density at (001) and (1 1 1) orientations depend on the content of Mg addition. The (001) deformation texture was developed from initial (001) cube texture, especially observed in the alloys with low Mg addition and pure Al sample. In alloys with high Mg addition, the development of (1 1 1) texture was clearly presented. An increase in Mg addition induced larger dislocation density during the deformation in a correlation with the formation of (1 1 1) deformation texture.

全件表示 >>

総説・解説記事等 【 表示 / 非表示

  • 高温鍛造における集合組織形成

    ティラティープウィワット プラモート, 長谷川 誠

    ぷらすとす   7 ( 76 )   209 - 213   2024年

    DOI

     詳細を見る

    記述言語:日本語   掲載種別:速報,短報,研究ノート等(学術雑誌)   単著  

受賞 【 表示 / 非表示

  • Grants during the completion phase of a doctorate

    2018年05月   The Graduate Academy of Technical University Dresden  

    受賞者:THIRATHIPVIWAT Pramote

科研費(文科省・学振)獲得実績 【 表示 / 非表示

  • Composition tuning and texture control in medium-high entropy alloys for a reduction of Young's modulus comparable to cortical bone

    研究課題/領域番号:25K17857  2025年4月 - 2027年3月

    若手研究(S)

     詳細を見る

    担当区分:研究代表者  資金種別:競争的資金

  • Microstructure control of biocompatible BCC high entropy alloys for achieving bone-like Young's modulus

    研究課題/領域番号:23K13574  2023年4月 - 2025年3月

    JSPS  若手研究(A)

  • Enhancement of strength-ductility trade-off by microstructure control of C-doped FeNiCoCr HEA.

    研究課題/領域番号:22K20478  2022年8月 - 2024年3月

    JSPS  研究活動スタート支援

     詳細を見る

    担当区分:研究代表者 

研究発表 【 表示 / 非表示

  • Texture control of biomedical Nb30Ti30Zr30Cr5Mo5 medium entropy alloy by high temperature deformation

    P. Thirathipviwat, R. Muraki, W. Onuki, M. Hasegawa

    日本金属学会 第3回 結晶性材料の結晶配向評価および結晶方位解析技術研究会 

     詳細を見る

    開催年月日: 2024年11月

    記述言語:英語   会議種別:口頭発表(一般)  

  • Texture control for a reduction of elastic modulus in biomedical Nb30Ti30Zr30Cr5Mo5 medium entropy alloy by high temperature deformation

    P. Thirathipviwat

    The 6 International Conference on Smart Materials and Nanotechnology (SmartMat@2024) 

     詳細を見る

    開催年月日: 2024年11月

    記述言語:英語   会議種別:口頭発表(一般)  

    国名:日本国  

  • A texture control of biomedical Nb30Ti30Zr30Cr5Ta5 medium entropy alloy via high temperature deformation

    Wakaba Onuki, Pramote Thirathipviwat, Makoto Hasegawa

    The 6 International Conference on Smart Materials and Nanotechnology (SmartMat@2024) 

     詳細を見る

    開催年月日: 2024年11月

    記述言語:英語   会議種別:ポスター発表  

  • 生体用Nb30Ti30Zr30Cr5Mo5ミディアムエントロピー合金における集合組織制御

    村木亮太, Pramote Thirathipviwat, 長谷川誠

    日本金属学会2024 年秋期講演(第175回) 

     詳細を見る

    開催年月日: 2024年9月

    記述言語:日本語   会議種別:口頭発表(一般)  

    国名:日本国  

  • Ti-Al基合金の高温平面ひずみ圧縮加工によるラメラ配向制御

    山田晃雅, Pramote Thirathipviwat, 長谷川誠

    日本金属学会2024 年秋期講演(第175回) 

     詳細を見る

    開催年月日: 2024年9月

    記述言語:日本語   会議種別:口頭発表(一般)  

    国名:日本国  

全件表示 >>

学会誌・論文誌編集等 【 表示 / 非表示

  • Crystals: Special Issue "Microstructure and Mechanical Properties of Weld Joints"

    Special Issue Editor 

    2023年1月
    -
    2023月8日
     

共同研究希望テーマ 【 表示 / 非表示

  • 量子線回折を用いたアルミニウム合金の転位組織評価技術の開発

共同・受託研究情報 【 表示 / 非表示

  • 量子線回折を用いたアルミニウム合金の転位組織評価技術の開発

    提供機関: 株式会社神戸製鋼所  国内共同研究  

    研究期間: 2023年04月  -  2024年3月