|
Affiliation |
College of Education, Department of School Education , Specialization in Technology Education |
|
Job Title |
Professor |
|
Research Fields, Keywords |
精密加工, 切断加工, 砥粒加工 |
|
Mail Address |
|
|
Related SDGs |
|
SAKAMOTO Satoshi
|
|
ORCID
The Best Research Achievement in Research Career 【 display / non-display 】
-
【Published Thesis】 Effect of Coolant of Water-solution in Superfinishing 1996.02
【Published Thesis】 Fundamental Study on Work Rotating Type Multi-Wire Sawing 2000.12
【Published Thesis】 Study on Precision Polishing Using Gelatin Stone 2009.02
The Best Research Achievement in the last 5 years 【 display / non-display 】
-
【Published Thesis】 The Impact of Showing Surface Property Measurement Data as an Intervention in Junior High School Metalworking Education(Journal of JSEE) 2024.11
【Published Thesis】 A Classroom Case Study on Using 3D CAD Simulation to Teach Air Engine Technology(Journal of JSEE) 2024.11
【Presentation(International conference)】 Influence of Workpiece Properties on Contact State in Electroplated Diamond Wire Sawing(International Conference on Machining, Materials and Mechanical Technologies (IC3MT2024) ) 2024.09
【Published Thesis】 鋳造教材の普及状況と技術科における取扱い状況との関係(日本産業技術教育学会誌) 2024
【Presentation(International conference)】 A Study on In-line Concentration Monitoring of Water-soluble Cutting Fluids Using the Automatic Brix Meter(International Conference on Machining, Materials and Mechanical Technologies (IC3MT2024) ) 2024.09
Degree 【 display / non-display 】
-
Doctor of Engineering - Kanazawa University
Campus Career 【 display / non-display 】
-
2021.4
Concurrently Yokohama National UniversityInterfaculty Graduate School of Innovative and Practical Studies Professor
-
2014.4
Concurrently Yokohama National UniversityGraduate School of Education Department of Teacher Education Specialization in Education Design, Technology Professor
-
2021.4
Duty Yokohama National UniversityCollege of Education Department of School Education Specialization in Technology Education Professor
-
2017.4-2021.3
Duty Yokohama National UniversityCollege of Education Department of School Education Specialization in Technology Education Professor
-
2014.4-2017.3
Duty Yokohama National UniversityCollege of Education and Human Sciences Department of School Education Specialization in Technology Education Professor
External Career 【 display / non-display 】
-
2011.11
-
2007.4-2011.3
Associate Professor
-
2004.9-2007.3
-
2003.10-2007.3
Associate Professor (as old post name)
-
1997.4-2003.9
Research Assistant
Academic Society Affiliations 【 display / non-display 】
-
1991.4
The Japan Society for Precision Engineering
-
1997.1
The Japan Society for Abrasive Technology
-
2011.5
The Iron and Steel Institute of Japan
-
1991.4
The Japan Society of Mechanical Engineers
-
2023.4
Japanese Society for Engineering Education
Research Areas 【 display / non-display 】
-
Manufacturing Technology (Mechanical Engineering, Electrical and Electronic Engineering, Chemical Engineering) / Manufacturing and production engineering
Books 【 display / non-display 】
-
R７年度版 技術・家庭 技術分野
竹野英敏，塩入睦夫，安東茂樹，大竹美登利,鈴木真由子,綿引伴子，鶴田敦子，坂本 智，他111名（ Role： Contributor）
開隆堂出版株式会社
Language：Japanese Book type：Textbook, survey, introduction
-
ハイテク五十年史に学ぶ将来加工技術
日本学術振興会 将来加工技術第136委員会（ Role： Contributor）
日本工業出版株式会社 （ ISBN:978-4-8190-3106-6 ）
Total pages：463 Language：Japanese Book type：Scholarly book
-
Glossary of Wood and Wood Machining Terms
（ Role： Contributor）
（ ISBN:9784860992293 ）
Language：Japanese Book type：Dictionary, encyclopedia
Papers 【 display / non-display 】
-
鋳造教材の普及状況と技術科における取り扱い状況との関係
源馬正也，坂本 智
日本産業技術教育学会誌 67 ( 1 ) 1 - 12 2025.3 [Reviewed]
Authorship：Last author Language：Japanese Publishing type：Research paper (scientific journal) Joint Work
-
In-line Concentration Monitoring of Water-soluble Cutting Fluids Using an Automatic Brix Meter
Kenji Yamaguchi1, Takeshi Gonda, and Satoshi Sakamoto
Advances in Science and Technology 11 - 18 2025.3 [Reviewed]
Authorship：Last author Language：English Publishing type：Research paper (scientific journal) Joint Work
-
Nao YAMAYOSHI, Masaya GEMMA, Satoshi SAKAMOTO
8 31 - 36 2025.2
Authorship：Last author, Corresponding author Language：Japanese Publishing type：Research paper (bulletin of university, research institution) Joint Work
Technology and Home Economics classes provide education on food production and consumption. The former is covered in Technology classes, while the latter is addressed in Home Economics classes. Although the content of these subjects is independent according to the Courses of Study, there are instances where lessons are linked, such as through integrating cultivation practices in Technology with cooking practices in Home Economics. One of the criteria for selecting cultivation materials in Technology is the ease of cultivation. As a result, some varieties that might be beneficial for collaboration with Home Economics cooking practices may be avoided as cultivation materials. This study primarily aimed to develop a curriculum that integrates cultivation practices in Technology classes with cooking practices in Home Economics classes, and it clarified the current state of cultivation materials used in Technology classes. Additionally, the study identified carrots as a useful vegetable for linking cultivation practices in Technology with cooking practices in Home Economics. Furthermore, an automatic irrigation system was developed to manage soil moisture, which is crucial for carrot cultivation.
Other Link： https://ynu.repo.nii.ac.jp/records/2001596
-
Production of a South-Pointing Chariot Using a 3D Printer
Yumeka WADA, Masaya GEMMA, Satoshi SAKAMOTO
8 23 - 30 2025.2
Authorship：Last author, Corresponding author Language：Japanese Publishing type：Research paper (bulletin of university, research institution) Joint Work
In recent years, 3D printers have been introduced not only in high schools and universities, but also in elementary and middle schools, and have been utilized in various situations. Digital fabrication skills are considered one of the essential skills for future educators. The main objective of this study is to train technology education teachers proficient in digital fabrication. To this end, we propose a course for university students where they design gear mechanisms using 3D CAD and fabricate them using a 3D printer. In this paper, we report the results of fabricating a south-pointing chariot as a teaching material for learning the mechanism of differential gears and verifying its indication accuracy. Relatively high indication accuracy was achieved by using 3D CAD and a 3D printer to design and fabricate the south-pointing chariot. Furthermore, it was also revealed that this south-pointing chariot could be utilized as a teaching material that captures students' interest.
Other Link： https://ynu.repo.nii.ac.jp/records/2001595
-
GEMMA Masaya, SAKAMOTO Satoshi
Journal of JSEE 72 ( 6 ) 27 - 32 2024.11 [Reviewed] [Invited]
Authorship：Last author Language：Japanese Publishing type：Research paper (scientific journal) Publisher：Japanese Society for Engineering Education Joint Work
Review Papers 【 display / non-display 】
-
切断加工における50年間の技術動向と最新技術
日本学術振興会 将来加工技術 第136委員会 創設50周年記念誌 86 - 89 2016.1
Language：Japanese Publishing type：Article, review, commentary, editorial, etc. (bulletin of university, research institution) Single Work
-
機械工学年鑑（加工学・加工機器）
坂本 智
日本機械学会誌 114 ( 1113 ) 620 - 623 2011.8
Language：Japanese Publishing type：Article, review, commentary, editorial, etc. (scientific journal) Single Work
Awards 【 display / non-display 】
-
Best Presentation Award (3rd ICDME)
2018.7 ICDME 2018 Organizing Committee Extremely thin metal foil blades as cutting tools for hard and brittle materials
Individual or group name of awards：Satoshi Sakamoto
-
Best Paper Award (5th ICAMEM)
2016.4 ICAMEM 2016 Organizing Committee Influence of the brittle behavior of work materials on microgrooving
Individual or group name of awards：Satoshi Sakamoto, Masaya Gemma, Keitoku Hayashi, Yasuo Kondo, Kenji Yamaguchi, Mitsugu Yamaguchi and Tsuyoshi Fujita
-
Best Paper Award (8th ICPMT)
2006.11 Slicing Performance of Work Rotating Type Multi-Wire Saw - Fundamental Experiments of High Viscosity Slurry-
Presentations 【 display / non-display 】
-
Relationship Between Friction Coefficient and Wire Strength of Diamond Electroplated Wire Tools
Su Yiming, Sakamoto Satoshi, Yamaguchi Kenji
Proceedings of JSPE Semestrial Meeting 2024.9 The Japan Society for Precision Engineering
Event date： 2024.9
Language：Japanese Presentation type：Oral presentation (general)
-
被削材の材料特性がワイヤ工具との接触状態におよぼす影響
蘇 一銘，坂本 智，山口顕司
2024年度砥粒加工学会学術講演会（ABTEC2024） 2024.8 公益社団法人 砥粒加工学会
Event date： 2024.8
Language：Japanese Presentation type：Oral presentation (general)
Venue：アオーレ長岡
-
水溶性加工液の濃度測定に関する研究（第2報）
山口顕司，坂本 智
2024年度砥粒加工学会学術講演会（ABTEC2024） 2024.8 公益社団法人 砥粒加工学会
Event date： 2024.8
Language：Japanese Presentation type：Oral presentation (general)
Venue：アオーレ長岡
-
シミュレーション技術を活用したものづくり教育の提案 －CAD・CAMによるシミュレーションの活用－
久保田久和，山本利一，坂本 智
日本教育情報学会 第40回年会 2024.8 日本教育情報学会
Event date： 2024.8
Language：Japanese Presentation type：Oral presentation (general)
Venue：青山学院大学
-
ものづくりのデジタル化を学習する題材選定の観点の提案 ～スターリングエンジンとエアエンジン教材～
久保田久和，山本利一，坂本 智
日本産業技術教育学会第67回全国大会（鳴門） 2024.8 一般社団法人 日本産業技術教育学会
Event date： 2024.8
Language：Japanese Presentation type：Oral presentation (general)
Venue：鳴門教育大学
Charge of on-campus class subject 【 display / non-display 】
-
2025 Field Work in Education
College of Education
-
2025 Metal Processing
College of Education
-
2025 Metal Processing
College of Education
-
2025 Practice in Mechanical Engineering
College of Education
-
2025 Mechanical Engineering
College of Education
Social Contribution(Extension lecture) 【 display / non-display 】
-
カーフロスを低減するスライシング技術★徹底解説～極細線ワイヤによるスライシング技術を詳解～
Electronic Journal 2629th Technical Seminar 東京・神田 2015.1